Tuners Tuning Pegs

Home > Uncategorized > Tuners Tuning Pegs

February 16th, 2008 admin Leave a comment Go to comments

Tuners Tuning Pegs

Problems Configuring a violin! HELP!?

Ok, so I used a violin during the summer (in exchange for a lower power was too big for me to come) and I tried to learn and all that. Unfortunately, due to changes in climate and humidity, should I remove it to give. Well, that does not work! I searched online guides on how to resolve, but not its permanence. And there is one fine tuner on the E-string, but do not be until the ankle continued to turn around again each time you in turn a deaf ear. Please help! (This is used in a 4 / 4 violin. I have not settled since I bought it.)

You're right, moisture plays a role in this area. If the wood dries, the tuners can be affected. You must keep a humidifier in his violin case to try to maintain a constant humidity. The pins have a conical shape and need to be driven into the holes to enforce. Sometimes, especially in old violins holes or low cost pin, or get a little out of everything that makes it more difficult for them to remain in place. Before resigning its existing tuners, try putting a little chalk dust on them. This creates friction. Check the chain adjusted properly, the stick light to the internal pressure to stay in place. No force .... do not want to break something. If all else fails, is it a violin shop, you may need new plugs or boreholes. BTW, it is common for a tuner that fine on top. They are inexpensive and can be easily added other networks, if desired.